If you get a new electric cooker or decide to replace the old one with another one, it would be good to think about installation. We gathered the required information for installing an electric cooker here in this blog. We also answered the most common questions about electric cookers to clear the path for you.

Can I Wire an Electric cooker all by Myself?

Of course, you can do it. Electricians are the same people as you are but with more experience.  In principle, you could conduct the job yourself and then hire a licensed electrician to inspect it and complete the documentation. In practice, you might find this a little challenging because you have never done this before and anything could happen! It’s important to remember that qualified electrician who makes an effort in on their work is risking their lives

The other Side of Cooker Installation

Of course, safely installing a cooker entail more than simply accurately installing electric cooker wire. But remember that you must also ensure that the cooker is physically safe in the place where it will be installed. You should also consider other appliances near the electric cook. We suggest avoiding installing an electric cooker near the washing machine.

• This is a reasonably simple procedure if your electric cooker is freestanding position. It would be great if the floor under the electric cooker is sturdy and it is on level ground. It is also good if you double-check the cooker that it doesn’t move easily, especially if it has a gas attachment for the hobs.
• If your cooker is installed completely, check sure it is securely fastened and that the cabinetry surrounding it is correctly placed as well. Even while fitted cookers are rarely the heaviest appliances in your home, they are nevertheless heavy enough to inflict property and personal damage if they fall out of the hole they were intended to be fastened in.
• Another thing to consider here is the correct lifting technique you should learn it properly. If you’re moving a large free-standing range cooker, it’s best to do it with two people or ask for help from family and lift with your knees to prevent injuring your back. Attempting to raise it yourself might cause harm, and shuffling it over the floor could cause damage to your floor. get help, don’t hurt yourself by trying to do too much.

Check the gas Connections to prevent gas leak

Gas hobs are seen on many free-standing electric cookers or stoves. It is unlawful (unless you are qualified) to begin tampering with gas lines on your own, but the hazards are simply too enormous. Breathing issues and, of course, explosions and death might result from leaking gas.

The only exception to this rule is if you’re uninstalling a cooker that’s already been properly fitted. These fittings are self-sealing and may be easily removed by twisting and pulling. They’re meant to allow untrained people to temporarily detach their cooker for cleaning purposes, but anything beyond removing and reconnecting that bayonet fitting will require the services of a competent specialist.

How to Prepare for Installing an electric cooker in your kitchen

Before doing anything you will need to ensure you prepare yourself for an easy peasy lemon squeezy installation process.

First of all, you will need to ensure that there is enough space for a new electric cooker in your kitchen and some extra inches, this will allow you to remove your old oven and allow you to manoeuvre your new cooker into place so much easier.

We suggest that would be better if you remove any materials or devices around the cooker and clean the area completely before positioning the cooker in the hole.

You also must turn off the power supply from the circuit breaker. Ensure that you turn the supply off at the main power supply panel. It will protect you when you are wiring the cooker and prevent electric shock.

Remember to isolate the installation area and prevent any moist and wet appliances such as washing machines or sink near the electric sockets.

You should also have tools and electrical requirements for installation. Make sure you have them in your house before starting to install a new electrical cooker.

Safety Notes for installing electric cooker in your kitchen

• Make sure that the main power supply is completely disconnected before starting the installation.
• Remove all existing sockets and switches connected to the wall include kitchen appliances.
• Carefully remove any kind of garbage stacked inside of the wall box
• Understand the difference between cables and always use the correct type for installation.
• Before starting any wiring, check the location of the terminal connection.
• If electrical sockets have a plastic gasket between the wall and cooker, make sure that is attached to the cooker accessory.
• It’s really important that metal ornamental sockets and switches are properly earthed to the floor. Earth wire should be connected to the earth terminal on the socket or switch, and then a short piece of wire is connected from this termination to the earth terminal in the wall box.

Hire a Professional

If you’re still in doubt to risk and install the new electric cooker by yourself or hire an electrician to do it properly, may our staff can help you to choose a convenient option.

It depends on your electrical cooker to determine how much professional experience is required to install it properly. If you are searching “electric cooker fitter near you” don’t hesitate to call us and talk about your request. Our skilled electricians at Electric Works London can help you. In some cases, you can easily install it by yourself with our expert instructions. A compact fitted oven with a power rating of less than 3kW and no gas components may be installed totally by yourself without the assistance of a professional.

The post How to Install an Electric Cooker? appeared first on Eurasian News.